Most RV toilet paper holders are wrong in two ways at once: the roll drags instead of spinning, and the holder sits somewhere awkward in a bathroom the size of a closet. Our best overall pick for 2026, the YIGII self-adhesive stainless steel holder, fixes the first problem with a free-spinning spindle and the second with a 6.2 inch by 2.6 inch footprint that mounts anywhere smooth. It carries a 4.6 star rating across more than 19k reviews, which is the largest review base in this group by a wide margin.
The reason factory holders feel so bad is mechanical, not cosmetic. Tight spindle tolerances mean a full roll will not rotate until it is nearly empty, and placement is a factory decision rather than yours. One iRV2 user described factory holders as a joke because the roll will not turn until it is almost empty, and a Keystone Forums owner noted the factory-supplied holder was not anywhere near where it was handy. Both complaints are about the part itself, not the plumbing.
One distinction changes every recommendation below. A wet bath combines the shower and the toilet behind one door, so paper needs a sealed or covered holder or it becomes unusable after every shower. A dry bath keeps them separate, and an open rod mounted on the wall works fine. Nearly every other buying decision follows from that one answer.
We compared 10 holders across adhesive, suction, over-the-tank and enclosed designs, checking material, mount strength, roll fit and how each one behaves with vibration and humidity. We also broke down the mounting mechanics, since that is the axis the forums argue about most, and pulled the install steps into a procedure you can follow in an afternoon. If you are still outfitting the rest of your rig, our heated toilet seat picks and phone card holder guide cover the neighbouring upgrades.
Table of Contents
Top 3 Picks for RV Toilet Paper Holders in 2026
YIGII Self Adhesive Holder
- SUS 304 stainless steel
- Adhesive or screw mount
- 6.2 by 2.6 inch
Best RV Toilet Paper Holders and Accessories (October 2026)
| Product | Specs | Action |
|---|---|---|
| YIGII Self Adhesive Toilet Paper Holder |
|
Check Latest Price |
 Auxmir Self Adhesive Matte Black Holder |
|
Check Latest Price |
| DGWHYC 3M Self-Adhesive Holder |
|
Check Latest Price |
 LAYUKI Adhesive Matte Black Holder |
|
Check Latest Price |
 Bathth Over The Tank Metal Holder |
|
Check Latest Price |
 HASKO accessories Vacuum Suction Holder |
|
Check Latest Price |
 Colist Enclosed ABS Waterproof Holder |
|
Check Latest Price |
 Zeadesign 3 Extra Roll Over-Tank Holder |
|
Check Latest Price |
| Anfly Holder with 2 Hanging Hooks |
|
Check Latest Price |
 kakaforsa Hanging Water-Resistant Pouch |
|
Check Latest Price |
1. YIGII Self Adhesive Toilet Paper Holder – Best Overall and the Most Reviewed
YIGII Self Adhesive Toilet Paper Holder, No Drilling Needed
SUS 304 stainless steel
Adhesive or screw mount
6.2 x 2.6 inch, 3.84 oz
Holds up to 10 lbs
Pros
- Adhesive holds firm on smooth surfaces
- Brushed SUS 304 resists rust and fingerprints
- Drilling not required
- Compact size fits standard to jumbo rolls
Cons
- Adhesive grip weakens after about a year
- Roll fit tight on oversized jumbo rolls
- Will not hold on textured or wallpapered walls
This is the one we kept coming back to. It weighs 3.84 ounces, measures 6.2 inch by 2.6 inch, and needs no assembly. The spindle runs loose enough that a full roll turns freely, which is the single complaint that ruins most RV holders.
It also has a 2-in-1 install. The backing plate peels and sticks, but the same plate accepts screws and is rated to hold up to 10 lbs, so you are not locked into a decision you might regret on a fiberglass wall. We put it first on evidence volume rather than novelty, since 19446 reviews at 4.6 is more feedback than the rest of this list combined, and the pattern is consistent: RV and camper owners install it in a couple of minutes and report that it survives travel.
When it works in an RV bathroom
Dry baths, and wet baths with a nearby shower door, are where this holder shines. On smooth fibreglass or glass it holds through highway vibration, and the small footprint leaves the rest of the wall free for a towel bar or a phone shelf. It is also the safest recommendation for a first-time install because the same unit works whether you choose adhesive or screws.
When to pick something else
Skip it in a shower stall where the roll gets soaked daily, and choose an enclosed holder instead. The adhesive grip does weaken after a year or more of humidity, and it will not hold on textured, wallpapered or painted-wood walls, while the stated 10 lb rating covers the roll rather than a wet towel plus a roll.
2. Auxmir Self Adhesive Matte Black Holder – Best for Tight Spaces
Auxmir Self Adhesive Toilet Paper Holder, Toilet Roll Holder, Matte Black
SUS304 stainless steel
Powder coated matte black
5.51 x 1.77 inch
Holds up to 11 lb
Pros
- Installs in about 5 seconds with no tools
- Strongest adhesive rating in this group
- Groove bar keeps rolls from sliding off
- Doubles as a paper holder or towel bar
Cons
- Bond is strong enough to damage a crooked install
- No spare adhesive pad in the box
This is the narrowest holder we tested, at 5.51 inch by 1.77 inch, and in a swivel bathroom or a Class B van where every centimetre counts, narrow beats deep. It is matte black powder-coated SUS304 stainless steel weighing 163 g, so it stays rigid without loading a thin wall.
The adhesive is the strongest spec in the roundup at up to 11 lb and installs in about 5 seconds, and the groove design bar along the front edge stops a loose end of paper from walking the roll off. At 9150 reviews and 4.6 stars it sits second by volume, with reviewers citing install speed, the retaining lip, and easy levelling in cramped spaces.
Where it fits best
Camper vans, Class B motorhomes and any dry bath with a genuinely narrow wall panel, including the side of a cabinet where a deeper holder would catch a knee. Because it doubles as a towel bar it can cover two jobs on one small wall.
Where it falls short
A wet bath, because the open rod leaves the roll exposed to spray and the adhesive is not rated for a permanently wet surface. The bond is also aggressive enough that a crooked placement is close to permanent, and reviewers report damaging the unit or the wall trying to reposition it, so level it with a spirit level before you press.
3. DGWHYC 3M Self-Adhesive Holder – Best Value with Warranty Backing
DGWHYC 3M Self-Adhesive Toilet Paper Holder No Drilling, SUS 304 Stainless Steel Brushed Nickel Wall Mounted Tissue Roll Holder for Bathroom, RV, Kitchen, Easy Install, Rust-Proof (DG-TPA22 Silver)
Waterproof 3M adhesive tape
Brushed nickel SUS 304
7.09 x 3.74 inch listed
1-year warranty
Pros
- Waterproof 3M tape holds in humid rooms
- SUS 304 body wipes clean
- About a one-minute tool-free install
- Compact footprint suits small bathrooms
Cons
- Adhesive limited to smooth surfaces like tile or glass
- Listed dimensions vary between product and spec pages
The DGWHYC is the one we would buy first for a dry bath on a budget. The body is SUS 304 stainless steel with a brushed nickel finish, and the included 3M tape is described as waterproof, which is what separates it from generic adhesive pads that let go in humidity.
Install takes about a minute with no tools, the unit weighs 4.16 ounces, and a 1-year replacement and refund warranty is unusual in this category. At 5451 reviews and 4.5 stars the feedback is broad: happy with the stainless body, the tape strength in humid rooms, and the small footprint, with surface restriction as the repeated limitation.
Best use in a camper or trailer
It works in a dry-bath travel trailer or fifth wheel with tile, glass or smooth laminate walls, where the waterproof tape and rust-resistant body hold up to a season of humidity. It is also the lowest-risk place to start if you have never installed RV hardware, since a wrong press is easier to recover from here than with the Auxmir.
Where it does not fit
Textured, painted or wallpapered walls are out, because the tape needs a smooth non-porous surface. It is also an open holder with no cover, so it will not survive direct shower spray. One data note: the listing and spec dimensions differ, 7.09 by 3.74 inch against 6.2 by 3.1 by 1.7 inch, so measure the panel before ordering.
4. LAYUKI Adhesive Matte Black Holder – Best Adhesive Pad Size
LAYUKI Toilet Paper Holder,Adhesive,Matt Black,Wall Mount,Toilet Paper Roll Holder,no Drilling,Bathroom/Rv/Washroom, SUS 304 Stainless Steel, Rustproof (Black, 1 Piece)
7 sq inch adhesive pad
Supports up to 105 oz
304 stainless steel matte black
Fits Family rolls
Pros
- Largest adhesive contact area in this group
- Handles standard to Family rolls
- Protruding rod ends stop roll drop-off
- Spare adhesive sheet included
- Works vertically or horizontally
Cons
- Adhesive wears out over time on painted walls
- Removal can affect surface finish
The LAYUKI solves the problem that ends most adhesive mounts: not enough contact area. Its pad covers 7 square inches and is rated to support up to 105 ounces, the largest adhesive claim among the ten holders we compared, at 6.3 inch by 3.1 inch and 0.07 kg.
It is also the most roll-tolerant in the roundup, fitting standard, Mega and Family rolls up to 7.8 inches in diameter, with protruding rod ends that keep a roll from dropping off during travel. A spare adhesive sheet is included, which is rare and directly answers the aging-bond complaint seen on cheaper holders.
Why the bigger pad matters on the road
A larger contact area spreads the load from a moving roll across more of the wall, which reduces the peeling that starts at the corners on washboard forest roads. The Family roll compatibility also means one holder covers both everyday use and the jumbo rolls people buy in bulk.
Where it is the wrong choice
Painted or wallpapered RV walls, where the oversized pad is only an advantage on a smooth, non-porous panel and a big pad on a bad surface fails just as completely as a small one. Removal is also reported as difficult and sometimes damaging, which matters in a rental or a rig you plan to resell.
5. Bathth Over The Tank Metal Holder – Best Over-the-Tank Mount
Over the Tank Toilet Paper Holder, Metal Toilet Paper Holder, Black
Free-standing over-tank hang
No hardware or assembly
7.2 x 1.25 x 4.13 inch
Lacquered metal
Pros
- Uses no wall or floor space
- No drilling or hardware needed
- Keeps the roll within reach in tiny bathrooms
- Some owners report years of use
Cons
- Metal is not rust-proof and can corrode in humidity
- Hook spacing may not match every tank
- Loose roll can bang against surfaces
When there is genuinely nowhere to mount anything, an over-the-tank holder is the answer. The Bathth hangs on the tank itself at 7.2 inch by 1.25 inch by 4.13 inch, so it consumes zero wall space and requires no hardware, drilling or assembly at all.
That makes it the most reversible option in the roundup. Nothing is bonded or screwed, so it works in a rental, a borrowed rig, or a bathroom where every square inch is already spoken for. At 4.6 stars from 2100 reviews the design is well proven, and reviewers consistently praise the space saving in very small bathrooms.
Where an over-the-tank mount wins
Swivel bathrooms, Class B vans, and older trailers with wallpapered or fabric-covered walls where no adhesive or screw will hold. It is the safest pick for a rental where you leave no marks at all, and it brings the roll closer to you, solving the awkward reach factory placement creates.
Where it falls short
Check your tank hook spacing before buying, because a smaller group of reviewers found the arm spacing did not sit squarely and the roll then rattles in transit. A wet bath is also the wrong environment, since the metal is not actually rust-proof and discolours over time.
6. HASKO accessories Vacuum Suction Holder – Best Removable Suction Mount
HASKO accessories – Powerful Vacuum Suction Cup Toilet Paper Holder – Wall Mount No Drilling Bathroom Stainless Steel Tissue Roll Dispenser – Adhesive 3M Stick Disc Included (Black)
Tool-free vacuum suction mount
3M adhesive disc included
Stainless steel body
5.51 x 5.31 inch
Pros
- Suction installs in seconds with no tools
- Strong hold on glass
- tile and smooth cabinetry
- Removable and repositionable for renters
- Reversible prongs double as a phone holder
Cons
- No suction over grout lines or on porous and bumpy surfaces
- Very large jumbo rolls sit loosely
- Suction weakens over time and may need retightening
Suction is the mounting method nobody fully trusts in a moving vehicle, and the reason is not the quality of the cup, it is the surface. A vacuum cup needs a flat, non-porous, airtight face, and RV wall panels, plywood and painted board give it none of those. On a glass shower door or a tile panel, this HASKO works well.
What makes it a good pick is the fallback. A 3M adhesive mounting disc is included for rough or concave surfaces, so if suction will not seal on a given panel you have a second option in the box. The 1268 reviews at 4.4 stars praise strong suction on glass shower doors and like that the unit moves without marking the wall.
When suction is the right call
Rented RVs, borrowed rigs, and any situation where you must leave the bathroom exactly as you found it, making it the cleanest no-trace option in the roundup when the surface cooperates. The reversible prongs that double as a phone holder add value in a bathroom with no shelf.
When to use the included disc instead
Any textured, painted, or concave panel. Rather than fighting the seal, press the 3M disc into the recess and mount to that, which converts a failed suction mount into a standard adhesive one. For long-distance travel on rough roads, choose a screw or adhesive holder instead, because vibration is the known failure mode for suction cups.
7. Colist Enclosed ABS Waterproof Holder – Best for Wet Baths
Colist Toilet Paper Holder Self Adhesive, with Cover, Cat Proof, Waterproof
Full-coverage ABS enclosure
6.42 x 6.42 inch
Phone shelf on top
Fits rolls to 5.7 inch
Pros
- Enclosure keeps the roll dry
- clean and pet-proof
- Visual window shows remaining paper
- Top surface doubles as a phone shelf
- Press-button lid opens easily for roll changes
- Accepts tissue boxes as well as rolls
Cons
- Bulky square footprint compared with an open rod holder
- Adhesive limited to smooth surfaces like tile
- glass or marble
This is the only fully enclosed holder we tested, and it is the correct answer for a wet bath. Injection-moulded ABS wraps the roll completely, so shower spray never reaches the paper, which is what separates it from every open rod in this list.
The enclosure does more than block water. A visual window shows how much paper remains, a press-button lid opens for quick roll changes, and the top surface works as a small shelf for a phone or a razor. It also accepts a facial tissue box. Reviewers value the dry-paper design and the shelf, but the bulk is a real drawback in a bathroom measured in inches.
Why a wet bath needs a cover
In a wet bath an open rod is unusable in practice. Even with the shower off, condensation settles on a horizontal spindle and the outer layers of the roll become a sodden mass that tears unevenly, so the cover solves the problem at the source rather than managing it.
Where the bulk becomes a problem
At 6.42 inch square it is the deepest footprint here, which is what pulls the 4.2 star average from 1907 reviews down. Swivel bathrooms and moulded fibreglass surrounds are where you will feel it. Also note the 5.7 inch roll diameter limit, which rules out jumbo and Family rolls.
8. Zeadesign 3 Extra Roll Over-Tank Holder – Best Multi-Roll Storage
Black Toilet Paper Holder with Storage Extra 3 Roll Tissue, Over The Tank Toilet Paper Roll Holder Wall Mount, Matte Black Camper Accessories Tissue Holder, Small Bathroom Essential for New Home, 1Pcs
Stores 3 extra mega rolls
Over-the-tank or adhesive mount
12 x 3.5 inch
304 stainless steel hook
Pros
- Keeps backup rolls within reach
- Two mounting options in one unit
- Wall-mounted so it uses no floor space
- 304 stainless steel hook resists rust
- No tools to install or swap rolls
Cons
- Metal hanger does not fit every tank and can catch the lid
- Hangs at a slight angle rather than sitting flush
Storage, not just dispensing, is what this one adds. It holds one roll in use and up to 3 extra mega rolls on the same bracket, at 12 inch by 3.5 inch. For longer trips or a rig shared by two people, that removes the annoying problem of a second holder taking up wall space.
It is also the only holder here with two mounting options in a single unit: a metal hanger that sits over the toilet tank, or an adhesive hook when the tank does not suit. Reviewers specifically value having the fallback when the over-tank fit is wrong.
When extra roll capacity earns its place
Full-time living, winter road trips, and shared bathrooms where running out means a trip to town. Holding three spare rolls turns a consumable into something you stop thinking about, and the dual mount means a tank mismatch does not end the purchase.
Where it disappoints
On tanks with a wide lid or an unusual profile the hanger can interfere with the lid and stop it closing properly, which is a plumbing-adjacent problem you do not want in a motorhome. At 641 reviews the 4.5 star average is encouraging rather than proven, and at 12 inches long it is the widest unit we tested.
9. Anfly Holder with Two Hanging Hooks – Best for Accessories
Anfly RV Toilet Paper Holder Camper,Self Adhesive Toilet Paper Holder with 2 Hanging Hooks for Campers, Bathroom, Kitchen and Bedroom,No Drill/Wall Mount, Black
Stainless steel body
2 integrated hanging hooks
5 x 3 inch
0.26 kg
Pros
- Highest average rating in the set
- Solid stainless steel feel
- No-drill install with no tools
- Two hooks add towel
- key or utensil storage
- Compact for tight RV interiors
Cons
- Adhesive needs a smooth surface and 24 hours of set time before use
The Anfly carries the highest average rating in this group at 4.7, and the reason is build quality rather than a single clever feature. Reviewers describe solid stainless steel that feels heavier than the price suggests, and camper and RV use is a recurring theme across the 900 reviews.
What earns it a place here is the pair of integrated hooks. In an RV bathroom where every hook is a small miracle, two on the same bracket as the paper holder is genuinely useful for a damp towel, keys, or a utensil. The no-drill install, 5 by 3 inch size at 0.26 kg, and acceptance of tile, glass, metal or wood give it more surface latitude than the stainless adhesive competitors.
Why the hooks change the value calculation
Every additional adhesive pad is another bond to age and another surface to prepare, so consolidating the paper holder and two hooks onto one bracket means one clean, one press, one cure time. In a dry bath on tile or glass, the surface latitude is a genuine advantage.
Where to choose something else
A wet bath, because there is no cover and the roll is exposed to spray. Plan for the 24-hour cure time if you are installing during a stop, and note that at 900 reviews this rating is the least-tested of the high-scoring entries.
10. kakaforsa Hanging Water-Resistant Pouch – Best for Outdoor and Portable Use
kakaforsa Hanging Toilet Paper Holder, Cat Proof, Water-Resistant, Blue
Waterproof polyester exterior
EPE foam padding
5.9 inch cube
Adjustable strap and buckle
Pros
- Waterproof exterior keeps the roll dry outdoors
- EPE foam returns to shape after compression
- Strap hangs on a pole
- line
- hook or branch
- Internal metal bar keeps the roll in place
- Lightweight with a wide opening for roll changes
Cons
- Soft fabric is bulkier than a rigid holder and adds no mounting rigidity
- Sized for a standard roll so larger rolls may not fit
Every other holder here needs a wall. This one needs a strap, which makes it the answer for outdoor showers, van life setups without a finished bathroom, and anyone who wants paper within reach at the campground grill. The adjustable strap and open buckle hang from a pole, a clothesline, a hook, a branch or a guy rope.
The waterproof polyester exterior with self-recovering EPE foam padding keeps the roll dry and returns to shape after compression, an internal metal bar holds the roll in place, and a smooth zipper with a wide opening makes roll changes quick. At 4.4 stars from 1549 reviews, reviewers like the cat-proof zip cover and find the strap genuinely versatile.
When a pouch beats a wall mount
Outdoor showers, campsite washing stations, and van builds where the bathroom is still a work in progress, since nothing has to be drilled, bonded or screwed. It also travels, stowing as a roughly 5.9 inch cube of fabric and foam between trips instead of being bolted to a wall for years.
Where it is the wrong tool
Inside a motorhome bathroom it will not stand in for a wall holder, because fabric and foam offer no rigidity and a heavy roll simply deforms the pouch. It is also sized for a standard roll, so Mega or Family rolls will not fit.
How to Choose a Mounting Style for Your RV Bathroom
Start with your bathroom type, then your wall material, then the mount. That order avoids the most common mistake, which is choosing a beautiful holder for a surface that cannot hold it.
Wet bath or dry bath: the question that decides everything
Wet bath or dry bath is the first question, and it is a hard requirement rather than a preference. In a wet bath, choose an enclosed or covered design such as the Colist ABS unit, because an open rod will be soaked by spray and unusable after every shower. In a dry bath, an open stainless rod is more reliable, easier to load, and takes up less depth. Then work outward from your wall material, since that decides what kind of mount will hold.
Adhesive vs suction vs screw vs over-the-tank
Adhesive is the default choice for smooth non-porous panels: fibreglass, glass, tile and sealed laminate. It takes seconds, leaves no holes, and the best pads in this roundup are rated between 10 and 11 lb, far above a paper roll.
Suction needs a flat airtight face, which RV wall panels rarely provide, so it is excellent on a glass shower door and useless on grout lines. Because vibration is its known failure mode, treat it as a temporary or rental solution.
Screws are strongest and most owners avoid them, because RV walls are thin and a long screw can puncture the skin or meet wiring. When you do drill, add a plywood backer first so the screw bites into solid material.
Over-the-tank mounts need no wall at all. Their weakness is tank fit and, in humid rooms, corrosion on cheaper finishes.
Forum owners lean hard toward adhesive. One Forest River Forums user advised buying hardware that sticks onto smooth surfaces because it was very sturdy, and to forget the screws and rely on quality adhesive mounts. That holds up with the data here, provided the surface is genuinely smooth.
Material guide: what survives humidity and road vibration
Brushed SUS 304 stainless steel is the best all-round material for an RV bathroom. It resists rust and fingerprints, wipes clean, and stays rigid through vibration, and every stainless entry in this roundup is rated for humid rooms. ABS plastic does not corrode and is the right choice for an enclosure, where waterproofing matters more than strength, at the cost of being heavier and bulkier than metal.
Plain metal and lacquered steel are the weakest option. Bathth sits in this category, and its reviews confirm the finish is not actually rust-proof and discolours over time. Chromed or lacquered hardware looks good on day one and ages badly in a wet bath.
For small organizers that pair well with a compact paper holder on the same wall, our phone and card holder roundup is worth a look. Holder-plus-accessory designs such as the Anfly add function in a bathroom where separate hardware will not fit.
How to Install an RV Toilet Paper Holder
Most install failures come from a dirty surface or impatience with cure time, not from a bad product. This sequence covers adhesive and screw mounts.
Choose a location with the roll reachable from a seated position, on the side of the toilet rather than behind it, and check that a cabinet door does not open into the holder.
Clean the wall with rubbing alcohol and wipe it dry. Adhesive bonds fail on oils, dust and mould release agent, and this step decides how long the mount lasts.
For screws, fit a plywood backer behind thin walls so the screw bites into solid material instead of a hollow panel, using the shortest screw that reaches the backer.
For adhesive, test the pad on a hidden corner first. If the backing lifts cleanly after 24 hours, the surface will not hold and you need a screw mount instead.
Press the holder firmly, hold it for a full 30 seconds, then wait 24 hours before loading a roll. That cure time is non-negotiable on every holder in this roundup.
Mount the roll and spin it by hand. If it drags, the spindle is not aligned, so adjust before tightening anything.
Re-test adhesive bonds every few months, especially in a wet bath, and watch for the first sign of a corner lifting. If you want to compare document handling for a home office rather than an RV, our paper shredder reviews cover that side of things.
Replace the OEM Holder or Keep It, and Which Paper Is RV-Safe
Keep the factory holder if it spins freely, sits within arm’s reach, and its adhesive is still bonded. Replace it when any one of those fails, because each failure is mechanical rather than cosmetic.
The complaint pattern on RV forums is specific. An iRV2 owner rated an OEM holder four stars but described it as a joke because a roll would not turn until almost empty, and a Keystone Forums owner found the factory-supplied holder was not anywhere near where it was handy. A Thor Forums thread opened by saying it would not even get started on the opportunities lost by not upgrading the toilet paper holder. The failure is nearly always spindle friction or placement, and neither is fixable without replacing the part.
On toilet paper, use paper labelled for RV or marine use. These products break down quickly in a holding tank, which prevents a blockage and an expensive service call, so avoid quilted, ultra-absorbent and fragrance-heavy household papers.
Matching roll to holder matters too. Standard rolls fit everything here, while Mega and Family rolls rule out the kakaforsa pouch and the Colist enclosure, which caps at 5.7 inch diameter. The LAYUKI takes rolls to 7.8 inch, making it the safest choice for bulk paper.
Frequently Asked Questions
Where should a toilet paper holder be mounted in an RV?
Mount it on a side wall within arm’s reach of a seated position, not behind the toilet. Choose a smooth, non-porous panel such as fibreglass, glass, tile or sealed laminate, and keep it clear of cabinet doors and towel bars. In a wet bath, place it outside the shower spray zone or use an enclosed holder.
What is the most durable material for an RV toilet paper holder?
Brushed SUS 304 stainless steel is the most durable material for an RV bathroom because it resists rust, fingerprints and humidity while staying rigid through road vibration. ABS plastic is the best choice for an enclosed waterproof cover since it cannot corrode. Plain lacquered metal is the least durable and discolours in humid rooms.
What is the best toilet paper roll holder overall?
The YIGII self-adhesive stainless steel holder is the best overall pick. It combines a free-spinning spindle with a 2-in-1 mount that accepts either adhesive or screws, holds up to 10 lbs on the backing, and measures 6.2 by 2.6 inch. It holds a 4.6 star average across more than 19k reviews.
Do I need a waterproof toilet paper holder for my RV?
Yes, if you have a wet bath where the shower and toilet share one enclosure. An open rod leaves the roll exposed to spray and condensation, which makes it unusable after every shower. Choose an enclosed ABS design such as the Colist holder, which has a full-coverage cover, a visual window and a press-button lid. Dry baths do not need a cover.
Are you supposed to put toilet paper in an RV toilet?
Yes, but use paper labelled for RV or marine use. It is designed to break down quickly in the black tank, which prevents clogs and expensive service calls. Avoid quilted, ultra-absorbent and heavily scented household papers, since those are the types that cause holding tank problems. Check the roll diameter against your holder, as jumbo rolls do not fit every model.
The Best RV Toilet Paper Holders and Accessories in 2026
The best RV toilet paper holders and accessories depend on one answer: is your bathroom wet or dry. Dry bath owners get the most from the YIGII self-adhesive stainless steel holder, because its free-spinning spindle and adhesive-or-screw mount solve the two factory problems in one part. Wet bath owners need the Colist enclosed ABS unit, since no open rod survives daily spray.
For narrow camper interiors the Auxmir fits where nothing else will, and where there is no usable wall at all the Bathth over-the-tank mount needs no hardware and leaves no marks. The HASKO suction unit suits a rental or a glass panel, and the Anfly adds two hooks in the same adhesive footprint. Whichever you choose, install it on a cleaned surface and give the adhesive a full day to cure before loading a roll.